This pool dining table is made from solid pine with 4-inch chamfered legs. The table frame is 4 x 1 inch side-panels with block mounted corner joints reinforced with parallel panels for extra stability and a square set. The cushion rails are also chamfered and fitted with retractable net drop (as shown) or with pocket rails.
The playing surface is best-quality Italian slate. Competition quality cushion-rubber is used. with the option to use competition-quality speed cloth or napped cloth (napped cloth requires more protection and maintenance for outside use).
All timber parts are protected with 3 coats of brushed-on exterior paint. All adhesives are water resistant. All screws and fixings are appropriate for exterior use.
With appropriate care, and the use of a tarpaulin or similar when the table is not in use, the table will be resistant to weather damage. Because the table superstructure is fixed to a drilled solid slate the table will resist noticeable warp or movement. If an exterior-plywood playing surface is used (because there is no outside concrete-base) the bed is strengthened by steel-struts, which again will mitigate against warping
solid pine or oak + 4 inch narrow straight legs
leather pockets + slate bed + exterior paint finish
One piece tops for:
weather protection + alfresco dining + ping pong
Additional tarpaulin protection is recommended when table is not in use
This style of table can also be made for indoor use and is ideal for kitchen or study use
All tables are made to order and built by us on-site
For more information email us at: